V-belt Dayco CP150
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP150 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP150 and any equivalents.
The Dayco CP150 is a classical wrapped V-belt in a C profile, with a 3911.6 mm length, 22 mm top width, 14 mm height, and 40° angle. It is used on drives that call for a classical C-section belt rather than a narrow wedge or synchronous design. Confirm fit by matching the profile and length on the existing belt or in the drive documentation.
Classical V-belts in the C section are common on heavier-duty industrial drives where a wrapped belt is specified. This Dayco belt is built to the C profile dimensions listed above, so it seats correctly in a C-section pulley groove. Check the drive for pulley wear, misalignment, and correct tension before fitting a replacement.
To confirm the right belt, read the marking on the back of the old belt and compare the profile letter and length. If the marking is worn, measure the outside length and check the pulley groove width against the 22 mm top width and 14 mm height of this belt. The 40° angle is the included angle of the belt cross-section.
Send the part number CP150, or the profile and length from your old belt, by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 3911.6mm
Frequently asked questions
- How do I confirm that the Dayco CP150 fits my drive?
- Check the old belt for a C profile marking and a length close to 3911.6 mm. Also verify that the pulley groove accepts a belt with a 22 mm top width and 14 mm height. If the marking is unreadable, measure the outside length and compare it with the data above.
- What does the 40° angle mean on this belt?
- The 40° value is the included angle of the V-belt cross-section. It is a standard dimension for classical wrapped V-belts and must match the pulley groove angle for proper contact.
- What information should I send for a quote?
- Send the part number CP150, or the profile letter and length from your existing belt. If you have the drive make and model, include that as well. We will confirm the belt or suggest an equivalent.