V-belt Dayco CP101
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP101 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP101 and any equivalents.
The Dayco CP101 is a classical V-belt in the C profile, measuring 2667 mm in length. It is built for the standard industrial drives where classical V-belts are commonly found, such as fans, pumps, compressors and general line-shaft equipment. This page covers what the belt is and how to confirm it fits your drive.
Classical V-belts like the CP101 are the workhorse of plant drives that run at moderate speeds and loads. The C profile gives a 22 mm top width and 14 mm height, with a 40 degree angle. The 2667 mm length is the datum you match against the drive, not a nominal guess from the old belt's back.
To confirm fit, read the marking on the back of the belt you are replacing and compare the profile letter and length to the CP101. Check the sheave groove for wear, alignment and any debris before fitting a new belt, since a worn groove can shorten belt life regardless of the belt's condition. If the old marking is unreadable, measure the top width and the outside length and send those figures with your request.
Dimensions
- Section
- C
- Length
- 2667mm
Frequently asked questions
- How do I confirm the Dayco CP101 fits my drive?
- Match the profile letter C and the 2667 mm length against the belt currently on the drive, and check the sheave groove width and condition. If the old marking is gone, measure the top width and length and send them with your part number.
- What does the C profile mean on this belt?
- It is the classical V-belt cross-section. On the CP101 the top width is 22 mm, the height is 14 mm and the included angle is 40 degrees.
- Can you help if I am not sure this is the right belt?
- Send the part number and the details from the old belt, such as the profile and length, by WhatsApp or email. We can confirm the belt or suggest an equivalent.