V-belt Dayco CP100
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP100 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP100 and any equivalents.
The Dayco CP100 is a classical wrapped V-belt with a C profile and a length of 2641.6 mm. It is built for industrial drives that use classical V-belt cross sections, where the belt runs in matched sheave grooves. Use the profile and length to confirm it matches the drive before you order.
Classical wrapped V-belts like the CP100 are common on fans, pumps, compressors and other general industrial drives. The C profile gives a 22 mm top width and 14 mm height, with a 40° angle that seats in the sheave groove. The wrapped construction is typical for drives that need a firm grip and resistance to normal operating conditions.
To confirm fit, check the old belt marking or measure the drive. The profile must match the sheave groove, and the length must match the original belt. If the marking is worn, send the part number, the profile and the length in millimeters. Our team can help confirm the right belt or suggest an equivalent.
When you request a quote, include the part number CP100 and the quantity. If you are replacing a set, note how many belts the drive uses so we can help you match the set. We carry Dayco belts and respond promptly by WhatsApp or email.
Dimensions
- Section
- C
- Length
- 2641.6mm
Frequently asked questions
- How do I confirm the Dayco CP100 fits my drive?
- Check the old belt for the profile and length, or measure the sheave groove and the belt length. The CP100 is a C profile belt with a 2641.6 mm length, 22 mm top width, 14 mm height and 40° angle. If you are unsure, send us the belt marking or the drive details.
- What information should I send for a quote?
- Send the part number CP100, the quantity you need, and any details from the old belt such as the profile and length. If you are replacing a set, tell us how many belts the drive uses. We reply promptly by WhatsApp or email.
- Can you help if the CP100 is not the right belt?
- Yes. If you send the old belt marking or the drive dimensions, we can help confirm the correct profile and length. We can also suggest an equivalent if the exact belt is not what you need.