V-belt Dayco BX98
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BX98 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX98 and any equivalents.
The Dayco BX98 is a cogged classical V-belt in the BX profile with a length of 2565.4 mm. Before you fit it, check the drive and sheaves so the new belt runs true and wears evenly.
Inspect sheave grooves for wear, corrosion, or embedded debris. A worn groove lets the belt sit too deep, which reduces grip and shortens belt life. Check that sheaves are aligned and that the driven equipment turns freely by hand. Confirm the old belt marking matches BX98 and 2565.4 mm before ordering.
The same size is also listed under Gates BX98. If you are replacing a belt on a drive that uses more than one belt, fit the full set at the same time so loads stay even across the grooves. Keep sheaves clean and free of oil or buildup.
Send the part number BX98, the belt marking, and the sheave or drive details by WhatsApp or email. The team replies promptly and can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 2565.4mm
Frequently asked questions
- What does the marking on the old belt tell me?
- Look for the profile and length. The Dayco BX98 is a BX profile cogged classical V-belt with a length of 2565.4 mm. If the marking matches, it is the same size.
- Should I replace all belts on the drive at once?
- Yes. On a multi-belt drive, fitting a full set at the same time keeps tension and load even across the grooves. Mixing a new belt with worn belts can cause the new one to carry more load and wear faster.
- What should I send for a quote?
- Send the part number BX98, the belt marking, and the sheave or drive details. If you are unsure of the profile or length, include a photo of the old belt marking. The team can confirm the right belt or suggest an equivalent.