V-belt Dayco BX94
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BX94 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX94 and any equivalents.
The Dayco BX94 is a cogged classical V-belt in the BX profile, with a length of 2463.8 mm. Cogged classical belts of this type are commonly used on industrial drives where a standard wrapped belt runs hot or slips, and the raw-edged construction is suited to smaller pulley diameters. This page covers how to confirm the belt fits your drive before you order.
To confirm fit, read the marking on the back of the belt you are replacing and compare it with the BX profile and the 2463.8 mm length shown here. Measure the outside length of the old belt if the marking is worn, and check the pulley groove width against the BX profile. If the drive uses more than one belt, replace the full set at the same time so the load stays even across the grooves.
Inspect the drive before ordering: look for worn or misaligned pulleys, glazed groove walls, and any oil or debris that would shorten belt life. A cogged classical belt like the BX94 runs on standard B-profile pulleys and is often chosen where heat buildup or small-diameter pulleys are a concern. Confirm the pulley grooves are clean and true before installation.
The same size is also listed under Gates BX94. Send the part number, the belt marking, and the drive details by WhatsApp or email, and the team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 2463.8mm
Frequently asked questions
- How do I confirm the Dayco BX94 fits my drive?
- Check the marking on the back of the old belt against the BX profile and the 2463.8 mm length, and measure the outside length if the marking is worn. Also confirm the pulley groove width matches the BX profile.
- Is the same size listed under another brand?
- Yes. The same size is also listed under Gates BX94.
- What should I send for a quote?
- Send the part number, the belt marking, and the drive details by WhatsApp or email. The team can confirm the right belt or suggest an equivalent.