V-belt Dayco BP68
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP68 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP68 and any equivalents.
The Dayco BP68 is a classical wrapped V-belt with a B profile and a length of 1803.4 mm. It is built for industrial drives where a wrapped classical belt is the specified replacement.
Classical wrapped V-belts like the BP68 are used on conventional industrial drives such as fans, pumps, compressors and other equipment that calls for a B-profile belt. The wrapped construction suits drives where the belt runs over standard V-groove pulleys.
To confirm fit, check the belt you are replacing: the profile should be B, the length should match 1803.4 mm, and the top width and height should be 17 mm and 11 mm. The 40-degree angle is part of the profile. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to the data here.
When you request a quote, send the part number BP68 and the profile and length from your drive. If you are unsure, a photo of the belt marking and the pulley grooves helps us confirm the correct belt.
Dimensions
- Section
- B
- Length
- 1803.4mm
Frequently asked questions
- What is the profile and length of the Dayco BP68?
- The Dayco BP68 has a B profile and a length of 1803.4 mm. Top width is 17 mm, height is 11 mm, and the angle is 40 degrees.
- How do I confirm that this belt fits my drive?
- Compare the profile and length to the belt you are replacing. The profile should be B and the length should be 1803.4 mm. Check the top width and height as well: 17 mm and 11 mm.
- What should I send to get a quote?
- Send the part number BP68 and the profile and length from your drive. If the old belt marking is unreadable, include a photo of the belt and the pulley grooves.