V-belt Dayco BP38
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP38 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP38 and any equivalents.
The Dayco BP38 is a classical V-belt with a B profile and a length of 1041.4 mm. When you need a replacement, the marking on the back of the old belt is the most reliable starting point. Read it carefully and use it to confirm the part before you request a quote.
This belt has a top width of 17 mm, a height of 11 mm and a 40-degree angle. These dimensions define how it sits in the pulley groove and how it transmits load. The profile and length are the key figures to match, so verify that the old belt shows B and 1041.4 mm before proceeding.
The BP38 is part of Dayco's line of classical wrapped industrial belts. It is not a narrow wedge belt or a cogged belt, so it suits drives designed for classical B-section belts. If the marking is worn or unreadable, measure the outside length and compare it with the 1041.4 mm figure.
To request a quote, send the part number BP38, the profile B and the length 1041.4 mm by WhatsApp or email. Our team replies promptly and can help confirm the right belt for your drive. If you are replacing more than one belt on the same drive, include the quantity so we can quote accordingly.
Dimensions
- Section
- B
- Length
- 1041.4mm
Frequently asked questions
- How do I confirm the Dayco BP38 is the correct replacement?
- Check the marking on the back of the old belt. It should show the profile B and the length 1041.4 mm. If those match, the BP38 is the correct part.
- What should I send to get a quote for the BP38?
- Send the part number BP38, the profile B and the length 1041.4 mm by WhatsApp or email. Include the quantity you need if you are replacing multiple belts.
- Can I use this belt on a drive that uses a different profile?
- No. The BP38 is a classical V-belt with a B profile. It must be matched to pulleys designed for B-section belts with a 17 mm top width and 11 mm height.