V-belt Dayco BP255
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP255 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP255 and any equivalents.
The Dayco BP255 is a classical wrapped V-belt in a B profile. It measures 6502.4 mm in length, 17 mm across the top, 11 mm in height, and has a 40-degree angle. When you are replacing a belt, matching these dimensions to the belt you are removing is the first step.
Start by reading the marking on the back of the belt you are replacing. If it shows BP255, this is the same belt. If the marking is worn or missing, measure the belt: a B profile is 17 mm across the top and 11 mm high, and the angle is 40 degrees. The length is 6502.4 mm. Confirm all of these before ordering, because a belt that is close but not exact will not run correctly.
Inspect the drive while the belt is off. Check the sheaves for wear, cracks, or debris, and make sure the pulleys are aligned. A worn sheave can damage a new belt quickly, so correcting any issues now avoids a repeat failure. If the drive uses multiple belts, replace them as a set so the load is shared evenly.
To request a quote, send the part number BP255 to MR by WhatsApp or email. If you are not certain this is the right belt, send the marking from the old belt or the drive details and the team will help confirm it or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 6502.4mm
Frequently asked questions
- How do I confirm the Dayco BP255 is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. If it reads BP255, it is the same belt. If not, measure the old belt: the B profile is 17 mm across the top, 11 mm high, with a 40-degree angle, and the length is 6502.4 mm.
- What should I check on the drive when replacing this belt?
- Inspect the sheaves for wear, cracks, or buildup, and verify alignment. If the drive uses more than one belt, replace all belts at the same time so they share the load evenly.
- How do I request a quote for the Dayco BP255?
- Send the part number BP255 to MR by WhatsApp or email. If you need help confirming the belt, include the marking from the old belt or the drive details, and the team will reply promptly.