V-belt Dayco BP228
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP228 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP228 and any equivalents.
The Dayco BP228 is a classical V-belt in the B profile with a length of 5816.6 mm. It is built for the kind of long, single-belt drives where the replacement has to match the original cross-section and length before anything else. The fastest way to confirm it is the right belt is to read the marking on the belt you are replacing and compare it against these figures.
Start with the profile. The BP228 is a B cross-section, 17 mm at the top, 11 mm high, with a 40-degree angle. If the belt on the drive is marked B, this is the same cross-section. If the old belt is a different profile, the sheave groove will not seat it correctly, so check that first.
Then check the length. This belt is listed at 5816.6 mm. Belts wear and stretch, and a used belt will not measure the same as a new one, so the marking on the back of the old belt is a better reference than a tape measure. Send us that marking, or the part number printed on it, and we will confirm the match against the BP228.
If the drive runs more than one belt, replace the full set at the same time so the load stays even across the grooves. Inspect the sheaves while the belts are off: worn grooves, debris and misalignment all shorten belt life. For a quote, send the part number BP228, the quantity, and the marking from the belt being replaced.
Dimensions
- Section
- B
- Length
- 5816.6mm
Frequently asked questions
- How do I confirm the Dayco BP228 fits my drive?
- Compare the profile and length. This belt is a B profile, 17 mm top width, 11 mm height, 40-degree angle, 5816.6 mm long. The marking on the back of the belt you are removing is the best reference. Send it to us and we will check it against the BP228.
- What information do you need for a quote?
- Send the part number BP228, the quantity you need, and the marking from the belt being replaced. If the old belt is not marked, tell us the drive and the sheave groove profile so we can help confirm the right belt.
- Should I replace more than one belt at a time?
- On a multi-belt drive, yes. Replacing the full set keeps tension and load even across the grooves. A new belt matched with worn belts will carry more than its share and wear faster.