V-belt Dayco BP148
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP148 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP148 and any equivalents.
The Dayco BP148 is a classical V-belt for industrial drives that use B-profile sheaves. It measures 3835.4 mm in length, with a 17 mm top width, 11 mm height, and a 40-degree angle. This wrapped belt is built for standard-duty power transmission on equipment such as pumps, fans, and compressors.
Classical V-belts like the BP148 are commonly found on drives where a single belt runs between two sheaves. To confirm fit, check that the sheave groove is cut for a B-profile belt and that the drive’s center distance allows for a 3835.4 mm belt length. The 17 mm top width and 11 mm height should match the groove dimensions.
When replacing, inspect the sheaves for wear, alignment, and debris. A worn groove can cause the belt to sit too deep, leading to slippage and reduced life. If the drive uses multiple belts, replace them as a set to keep tension even across all grooves.
For a quote, send the part number BP148 and the quantity you need. If you are unsure whether this is the correct belt, include the drive’s sheave profile and the old belt’s markings. Our team can confirm the B profile and 3835.4 mm length, or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 3835.4mm
Frequently asked questions
- What does the B profile mean for the Dayco BP148?
- The B profile indicates a classical V-belt with a 17 mm top width and 11 mm height. It is designed for sheaves with a matching B-section groove.
- How do I confirm the length of the BP148?
- The belt length is 3835.4 mm. Measure your existing belt or check the drive’s center distance and sheave diameters to confirm it matches.
- Can I use the BP148 on a drive that takes multiple belts?
- Yes, if the drive uses B-profile sheaves and the length is correct. For multi-belt drives, replace all belts at the same time to maintain even tension.