V-belt Dayco AP79
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP79 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP79 and any equivalents.
The Dayco AP79 is a classical wrapped V-belt with an A profile. Its length is 2057.4 mm, with a top width of 13 mm, a height of 8 mm and a 40-degree angle. When you read the marking on the back of an old belt, these are the values to match.
The marking on the back of a worn belt is the most direct way to identify what the drive needs. Look for the part number, the profile letter and the length. For this Dayco belt, the profile is A and the length is 2057.4 mm. The top width is 13 mm, the height is 8 mm and the angle is 40 degrees. These dimensions define the belt's fit in the pulley groove.
If the old marking is worn or unreadable, measure the belt's top width, height and outside length, or note the drive's pulley groove dimensions. The AP79 is a classical V-belt in the A profile. We carry Dayco belts and can confirm the right part or suggest an equivalent based on the profile and length you provide.
Send the part number, profile and length by WhatsApp or email to request a quote. If you are replacing more than one belt on the same drive, include the quantity and any other markings from the old belts. Our team replies promptly and can help you verify the match.
Dimensions
- Section
- A
- Length
- 2057.4mm
Frequently asked questions
- How do I read the marking on an old Dayco AP79 belt?
- The marking typically shows the part number, profile and length. For the AP79, the profile is A and the length is 2057.4 mm. The top width is 13 mm, the height is 8 mm and the angle is 40 degrees. Use these values to confirm a replacement.
- What should I send to request a quote for the Dayco AP79?
- Send the part number AP79, the profile A and the length 2057.4 mm by WhatsApp or email. If you have the old belt, include a photo of the marking. We will confirm the belt or suggest an equivalent.
- Can you help if the marking on my old belt is unreadable?
- Yes. Measure the top width, height and outside length of the old belt, or note the pulley groove dimensions. With those measurements and the drive details, we can identify the correct profile and length.