V-belt Dayco AP58
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP58 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP58 and any equivalents.
The Dayco AP58 is a classical V-belt in the A profile, with a 1524 mm length and a 40 degree angle. It measures 13 mm across the top and 8 mm in height. When you are replacing a belt, matching these marking values to the belt on the drive is the first step.
Start by reading the marking on the back of the old belt. A replacement should match the profile and the length: A profile, 1524 mm. The top width of 13 mm and the height of 8 mm confirm the cross-section, and the 40 degree angle matches the groove it runs in. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to the 1524 mm figure.
Check the drive before installing a new belt. Look for worn sheave grooves, misalignment, or damaged bearings, since these can shorten belt life. The AP58 is a classical wrapped V-belt, so it is suited to standard industrial drives that take an A profile belt of this length.
If you are unsure whether the AP58 is the correct replacement, send the part number from the old belt, the drive make and model, and the sheave dimensions. Our team can confirm the profile and length or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1524mm
Frequently asked questions
- How do I confirm the Dayco AP58 matches my old belt?
- Compare the profile and length: A profile, 1524 mm. Also check the top width of 13 mm and height of 8 mm. If the old belt is not marked, measure its outside length and compare it to 1524 mm.
- What should I check on the drive before replacing the belt?
- Inspect the sheave grooves for wear, confirm the pulleys are aligned, and check bearings for play or roughness. These conditions affect belt life and should be corrected before installing a new belt.
- What information do you need to quote the Dayco AP58?
- Send the part number AP58, or the marking from your old belt, along with the drive make and model and the sheave dimensions. Our team will confirm the profile and length or suggest an equivalent.