V-belt Dayco AP56
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP56 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP56 and any equivalents.
The Dayco AP56 is a classical wrapped V-belt with an A profile and a length of 1473.2 mm. If you are replacing a worn belt, start by reading the marking on the back of the old belt and compare it to this part number.
The marking on a classical V-belt typically shows the profile and the part number. The AP56 is an A-profile belt, with a top width of 13 mm, a height of 8 mm and a 40-degree angle. The length is 1473.2 mm. Match these values to the belt you are removing.
If the old marking is worn or unreadable, check the drive for the belt profile and measure the length along the belt path. The AP56 is a wrapped classical V-belt, not a narrow wedge belt, cogged belt or synchronous belt. Confirm the profile before ordering.
Send the part number AP56, the profile and the length from the old belt, or a photo of the marking, by WhatsApp or email. The team can confirm the belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1473.2mm
Frequently asked questions
- How do I read the marking on the old belt?
- Look for the profile letter and the part number on the back of the belt. For this Dayco belt, the marking is AP56, which corresponds to an A profile and a 1473.2 mm length.
- What should I send to request a quote?
- Send the part number AP56, or the profile and length from the old belt, by WhatsApp or email. A photo of the marking also helps confirm the correct belt.
- Can you help if the marking is unreadable?
- Yes. Send the drive details and the measured length along the belt path. The team can help identify the correct profile and length.