V-belt Dayco AP25
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP25 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP25 and any equivalents.
The Dayco AP25 is a classical wrapped V-belt in the A profile. If you are replacing a belt on an existing drive, the marking on the back of the old belt is the best place to start. It gives you the part number to match before you measure anything.
A typical back marking shows the part number, the profile and the length. On this belt the profile is A and the length is 685.8 mm. The cross-section is 13 mm at the top, 8 mm high, with a 40° angle. Confirm those three items against the old belt, then check the drive for worn sheaves, oil or heat before you fit the replacement.
Send the part number from the old belt, or a photo of the marking, by WhatsApp or email with the quantity you need. We carry the Dayco AP25 and can confirm it against your drive details. If the marking is worn away, send the profile and the outside length so we can match it.
Dimensions
- Section
- A
- Length
- 685.8mm
Frequently asked questions
- How do I identify the Dayco AP25 on an existing drive?
- Read the marking on the back of the old belt. It should show the part number, the A profile and the 685.8 mm length. If the marking is unreadable, measure the outside length and the top width and send those values.
- What are the dimensions of this belt?
- The Dayco AP25 is an A profile classical V-belt. It is 685.8 mm long, 13 mm across the top, 8 mm high and has a 40° angle.
- What should I send to request a quote?
- Send the part number AP25 and the quantity. If you are matching an old belt, include a photo of the back marking or the profile and outside length. We reply by WhatsApp or email.