V-belt Dayco AP130
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP130 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP130 and any equivalents.
The Dayco AP130 is a classical V-belt in the A profile, with a 13 mm top width, 8 mm height, 40° angle and 3352.8 mm length. When matching it to the belt being replaced, confirm each of those figures against the old belt and the drive.
Start with the marking on the back of the belt you are removing. A classical V-belt may carry a part number, a profile letter and a length; the AP130 is identified by its part number and its A profile. If the old belt is worn, frayed or stretched, its length may no longer read true, so compare the profile and cross-section to the drive rather than relying on the worn belt alone.
Measure the old belt's top width, height and angle where possible, and check the pulley groove to confirm the profile. The AP130 has a 13 mm top width, 8 mm height and 40° angle, with a length of 3352.8 mm. These values are the basis for matching the replacement to the drive.
For a quote, send the part number AP130, the profile and the length from the old belt's marking, along with the equipment or drive reference. If the old belt's marking is unreadable, send the measured top width, height, angle and length. We carry the Dayco AP130 and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 3352.8mm
Frequently asked questions
- How do I match the Dayco AP130 to the belt I am replacing?
- Check the old belt's marking for the part number, profile and length, then compare the cross-section to the drive. The AP130 is an A-profile classical V-belt with a 13 mm top width, 8 mm height, 40° angle and 3352.8 mm length.
- What measurements should I send with a quote request for the AP130?
- Send the part number AP130 and, from the old belt, the profile letter, top width, height, angle and length. If the marking is unreadable, measured values from the old belt help confirm the match.
- Can you help if the old belt's marking is worn off?
- Yes. Send the measured top width, height, angle and length of the old belt, along with the drive or equipment details. We can help confirm the right belt or suggest an equivalent.