V-belt Dayco AP120
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP120 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP120 and any equivalents.
The Dayco AP120 is a classical wrapped V-belt in the A profile, with a 3098.8 mm length, 13 mm top width, 8 mm height and a 40° angle. When you are replacing a belt, match these four dimensions to what is on the drive before you order. The part number on the old belt is the fastest starting point.
Read the marking on the back of the belt being replaced. If it shows AP120, this belt matches that callout. If the marking is worn or the belt is missing, measure the top width, the height and the outside length, and confirm the included angle. The AP120 is an A-profile classical V-belt, so those dimensions are the ones to compare.
A wrapped classical V-belt like the AP120 is used on drives where the sheave groove and belt profile must agree. Check that the sheaves are not worn or grooved and that the belt sits correctly in the groove. If the drive runs more than one belt, replace the full set so the load stays shared.
Dimensions
- Section
- A
- Length
- 3098.8mm
Frequently asked questions
- How do I confirm the Dayco AP120 is the right replacement?
- Compare the A profile, the 13 mm top width, the 8 mm height, the 40° angle and the 3098.8 mm length against the belt you are removing. If the old belt is marked AP120, that callout matches this belt.
- What should I send to get a quote for this belt?
- Send the part number AP120, or the dimensions from the old belt, by WhatsApp or email. If the marking is unreadable, include the top width, height, length and angle so the profile and length can be confirmed.
- Can you help if the belt on the drive has no readable part number?
- Yes. Send the measured top width, height, outside length and angle, along with a photo of the drive and sheave if possible. The team can confirm the A profile and the 3098.8 mm length against the Dayco AP120.