V-belt Dayco AP117
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP117 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP117 and any equivalents.
The Dayco AP117 is a classical wrapped V-belt in the A profile, with a 3022.6 mm length, 13 mm top width, 8 mm height, and a 40° angle. To match it to the belt being replaced, read the marking on the back of the old belt and compare the profile, length, and dimensions before ordering.
The most reliable way to confirm the correct belt is to inspect the old belt. Check the back of the belt for the part number and any profile or length marking. If the marking is worn or missing, measure the top width, height, and outside length with a belt gauge or tape. The Dayco AP117 has an A profile, so the top width should be 13 mm and the height 8 mm. Its length is 3022.6 mm, and the angle is 40°.
Because this is a classical wrapped V-belt, it may be used on drives where a standard classical profile is specified. When replacing, confirm that the replacement belt matches the old belt in profile, length, and cross-section. If the drive uses multiple belts, replace them as a set so the load is shared evenly.
For a quote, send the part number AP117, the quantity, and the drive details. If you are unsure about the profile or length, include a photo of the old belt marking or the measured dimensions. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 3022.6mm
Frequently asked questions
- How do I confirm the Dayco AP117 is the right belt for my drive?
- Compare the marking on the old belt with the AP117. The AP117 is an A-profile classical wrapped V-belt with a 3022.6 mm length, 13 mm top width, 8 mm height, and 40° angle. If the old belt matches these dimensions and profile, it is the correct replacement.
- What should I send to request a quote for the Dayco AP117?
- Send the part number AP117, the quantity needed, and any drive details or photos of the old belt. If you have the old belt marking or measured dimensions, include those so the team can confirm the match.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses multiple belts, replace all belts as a set. Mixing new and used belts can cause uneven load sharing. The Dayco AP117 should be ordered in the quantity required for the full set.