V-belt Dayco AP107
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO AP107 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AP107 and any equivalents.
The Dayco AP107 is a classical wrapped V-belt with an A profile and a 2768.6 mm length. It is used in general industrial drives where a standard classical cross-section is required. Confirm fit by checking the profile and length against your drive.
This belt has a top width of 13 mm, a height of 8 mm and a 40° angle. The A profile is a common classical cross-section for light to medium-duty drives on pumps, fans, compressors and similar equipment. The wrapped construction is suited to drives where a standard classical belt is specified.
To confirm fit, read the marking on the back of the old belt and compare the profile and length to the Dayco AP107. If the marking is worn, measure the top width and the outside length of the belt. The profile must match the pulley groove, and the length must match the drive's required center distance.
When you request a quote, send the part number AP107 and the quantity. If you are replacing a belt on an existing drive, include the old belt marking or the measured profile and length. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 2768.6mm
Frequently asked questions
- How do I confirm the Dayco AP107 fits my drive?
- Check the old belt marking for an A profile and a 2768.6 mm length. If the marking is unreadable, measure the top width and outside length and compare to the 13 mm top width and 2768.6 mm length of the AP107.
- What does the A profile mean for my application?
- The A profile is a classical V-belt cross-section with a 13 mm top width, 8 mm height and 40° angle. It is used on drives that specify a classical A-section belt.
- What information should I send for a quote?
- Send the part number AP107 and the quantity. If you are matching an existing drive, include the old belt marking or the measured profile and length so the team can confirm the fit.