V-belt Dayco 5VX 630
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- Cog wedged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and DAYCO: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 5VX 630 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5VX 630 and any equivalents.
This Dayco 5VX 630 is a cogged narrow V-belt in the 5VX profile with a length of 1600.2 mm. It is built for industrial drives that run narrow-section wedge belts. The cogged construction is typical of this series, which is intended for drives where a standard wrapped belt may not perform as needed.
To match this belt to the one being replaced, start with the marking on the back of the old belt. You are looking for the profile and the length: 5VX and 630. The 5VX profile and the 1600.2 mm length are the two critical dimensions. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 1600.2 mm, and confirm the cross-section matches the 5VX profile.
The same size is also listed under Mitsuboshi as 5VX 630. If the drive currently uses a Mitsuboshi belt with that marking, the Dayco 5VX 630 is a size match. Always confirm the profile and length against the belt you are removing before ordering, and inspect the sheaves for wear or debris that could affect belt life.
Dimensions
- Section
- 5VX
- Length
- 1600.2mm
Frequently asked questions
- How do I confirm the Dayco 5VX 630 is the right replacement?
- Check the marking on the back of the belt you are replacing. It should show 5VX and 630. If the marking is gone, measure the outside length and confirm it is 1600.2 mm, and verify the cross-section matches the 5VX profile.
- What does the 5VX profile mean?
- 5VX is a narrow V-belt profile, also called a wedge belt. This Dayco belt is a cogged narrow V-belt in that profile with a length of 1600.2 mm. The profile and length are the key dimensions for matching the belt to your drive.
- Is the same size listed under another brand?
- Yes. The same size is also listed under Mitsuboshi as 5VX 630. If you are replacing a Mitsuboshi belt with that marking, the Dayco 5VX 630 is a size match. Confirm the profile and length against your old belt before ordering.