V-belt Dayco 3VX 560
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
- Series
- Cog wedged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and DAYCO: matching part numbers →DAYCO and STARK: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 3VX 560 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3VX 560 and any equivalents.
The Dayco 3VX 560 is a cogged narrow V-belt in the 3VX profile with a length of 1422.4 mm. It is part of the Cog wedged industrial belts series. When you need to match a belt being replaced, start with the marking on the old belt and confirm both profile and length.
To match this belt to the one coming off the drive, read the marking on the back of the old belt. If it shows 3VX 560, this Dayco belt matches that profile and length. The same size is also listed under Stark 3VX 560 and Mitsuboshi 3VX 560, so those markings point to the same size.
If the old belt is worn or the marking is unreadable, measure the length and check the profile against the pulley groove. The 3VX profile is a narrow V-belt cross-section. The length is 1422.4 mm. Send those two details with your quote request.
Cogged narrow V-belts are used on industrial drives where a standard narrow V-belt may not provide the required flexibility. This belt is a single cogged narrow V-belt, not a banded or double-V design. Confirm the drive uses a single belt before ordering.
Dimensions
- Section
- 3VX
- Length
- 1422.4mm
Frequently asked questions
- How do I match the Dayco 3VX 560 to the belt I am replacing?
- Check the marking on the back of the old belt. If it reads 3VX 560, this belt matches that profile and length. If the marking is gone, measure the length and confirm the 3VX profile against the pulley groove.
- What is the length of this belt?
- The length is 1422.4 mm.
- What information should I send for a quote?
- Send the part number 3VX 560, the quantity, and any details from the old belt marking. If the marking is unreadable, send the measured length and profile.