V-belt Dayco 2B17315
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 2B17315 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2B17315 and any equivalents.
This Dayco 2B17315 is a banded V-belt in the 2B profile, built for drives that use two joined V-belts running as a set. It measures 800.1 mm effective length, 28.7 mm width and a 40° angle. Use the markings and dimensions to confirm it matches your drive before ordering.
Banded V-belts are common on industrial drives where two or more V-belts must stay aligned and share the load, such as on some compressors, fans and process machinery. The 2B profile indicates a two-belt band, and the 800.1 mm effective length is measured around the pitch line of the belt. Because the belts are joined, the set cannot be replaced with individual V-belts without changing the drive setup.
To confirm fit, check the old belt marking on the back for the part number and profile, then measure the effective length and width. This belt is 28.7 mm wide and has a 40° angle. If the drive uses a matched set, replacing the full banded belt keeps the load balanced across the grooves. Send the part number, profile and length from your old belt for a quote.
Dimensions
- Length
- 800.1mm
Frequently asked questions
- What does the 2B profile mean on this Dayco belt?
- The 2B indicates a banded V-belt made of two B-section V-belts joined together. It is used where multiple belts must run as a matched set on the same drive.
- How do I confirm this belt fits my drive?
- Compare the part number, profile and dimensions from your old belt. This belt has an effective length of 800.1 mm, a width of 28.7 mm and a 40° angle. If those match, it is the correct replacement.
- Can I replace a banded belt with individual V-belts?
- No. Banded V-belts are designed to run as a set, and individual belts may not stay aligned or share the load correctly. Replace the full banded belt with the same profile and length.