V-belt Dayco 22540
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 22540 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22540 and any equivalents.
The Dayco 22540 is an automotive V-belt with a 1371.6 mm effective length, a 17.53 mm width and a 38° angle. If you are replacing a belt on a drive, this page gives you the numbers to match before you order.
The most reliable way to match this belt is to read the marking on the belt you are removing. Compare the part number, the effective length of 1371.6 mm, the width of 17.53 mm and the 38° angle against the Dayco 22540. The alias 15A1370 is also used for this belt, so either marking can identify it.
A used belt can measure differently from a new one, so confirm the profile and the length from the drive documentation or the old belt rather than from a stretched belt alone. If the number on the belt is worn or unreadable, send the drive details and the dimensions you can measure.
When you request a quote, include the part number 22540 or the alias 15A1370 and the quantity you need. If you are unsure whether this is the correct belt for the drive, send a photo of the old belt marking and the drive arrangement, and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 1371.6mm
Frequently asked questions
- How do I confirm the Dayco 22540 is the belt I need?
- Match the marking on the belt being replaced: the part number 22540 or the alias 15A1370, along with the effective length of 1371.6 mm, the width of 17.53 mm and the 38° angle.
- What should I send to get a quote?
- Send the part number 22540 or 15A1370 and the quantity. If the old belt marking is unreadable, include a photo and the drive details so the team can help confirm the right belt or suggest an equivalent.
- Can I measure the old belt to identify it?
- You can measure it, but a used belt may not match the original dimensions. Use the marking on the belt or the drive documentation first, and treat measurements as a secondary check against the 1371.6 mm effective length, 17.53 mm width and 38° angle.