V-belt Dayco 22528
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 22528 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22528 and any equivalents.
This Dayco 22528 is an automotive V-belt with a trapezoidal profile, built for accessory drives on cars and light trucks. It measures 1339.85 mm effective length, 17.53 mm top width, and a 38° angle. Use the part number and the marking on the old belt to confirm the correct replacement.
Automotive V-belts in this trapezoidal series are commonly used on engine accessory drives such as alternators, water pumps, and power steering. The 38° angle and 17.53 mm width are the key profile dimensions; the 1339.85 mm effective length is measured around the belt path. If your drive uses a single V-belt rather than a serpentine or multi-rib layout, this is the correct family of belt.
To confirm fit, read the marking on the back of the old belt. Look for the part number 22528 or the alias 15A1340, then compare the profile width and effective length. A worn belt can measure slightly long, so use the printed numbers as the reference. If the marking is unreadable, measure the top width and the outside circumference with a belt gauge, or send the drive make, model, and engine details for a check.
When you replace a V-belt, inspect the pulleys for wear, rust, or oil, and check the tensioner and idler bearings. If the drive uses two or more belts, replace them as a set so they share the load evenly. Keep the old belt as a reference until the new one is fitted and the tension is set to the drive specification.
Dimensions
- Length
- 1339.85mm
Frequently asked questions
- How do I confirm that the Dayco 22528 fits my drive?
- Check the marking on the back of the old belt for 22528 or 15A1340, then compare the profile width of 17.53 mm and the effective length of 1339.85 mm. If the marking is gone, measure the belt with a gauge or send the drive details for a check.
- What does the 38° angle mean on this V-belt?
- The 38° angle is the included angle of the belt's trapezoidal cross-section. It must match the pulley groove angle for the belt to seat correctly and transmit power without slipping or wearing prematurely.
- Can I replace just one belt in a multi-belt drive?
- For drives that use two or more V-belts, replace them as a set. Belts wear and stretch at different rates, so mixing a new belt with used ones can cause uneven loading and shorter service life.