V-belt Dayco 22400
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 22400 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22400 and any equivalents.
The Dayco 22400 is an automotive V-belt with a 17.53 mm top width and a 38° angle. Its effective length is 1016 mm, measured along the pitch line where the belt seats in the pulley groove. These three figures are what you match when selecting a replacement.
Profile and length drive the selection. The 38° angle and 17.53 mm width place this belt in a defined pulley groove, so a belt of another width or angle will not seat correctly. The 1016 mm effective length is the dimension to compare against your drive, not the outside circumference.
When replacing, read the marking on the back of the old belt first. If it shows 22400 or the alias 15A1015, you have the correct reference. Measure the effective length only if the marking is worn away, and confirm the width and angle before ordering.
For a quote, send the part number 22400 or the alias 15A1015, the quantity, and the equipment or drive it fits. If you are unsure between two references, send the old belt marking and the pulley dimensions and we will help confirm the right belt.
Dimensions
- Length
- 1016mm
Frequently asked questions
- What do the 17.53 mm width and 38° angle mean?
- They define the belt's cross-section. The 17.53 mm width and 38° angle must match the pulley groove so the belt seats and transmits load without slipping or bottoming out.
- Is the 1016 mm length the outside circumference?
- No. The 1016 mm is the effective length, measured along the pitch line. Use it when comparing against a drive specification or an old belt marking.
- What should I send for a quote?
- Send the part number 22400 or the alias 15A1015, the quantity you need, and the equipment the belt fits. If the old belt marking is unreadable, send the pulley dimensions instead.