V-belt Dayco 22395
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Trapezoidal automotor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO 22395 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22395 and any equivalents.
The Dayco 22395 is an automotive V-belt with a 17.53 mm width, a 38-degree angle and an effective length of 1003.3 mm. Before you fit it, inspect the drive and sheaves so the new belt runs true from the start.
Check each sheave for wear, rust, burrs or a polished groove floor. Look for misalignment between pulleys and confirm the sheave groove matches the 38-degree angle and the 17.53 mm width of the Dayco 22395. A worn or misaligned groove can shorten belt life no matter how good the belt is.
Inspect the rest of the drive as well: bearing play, mounting bolts, and any idler or tensioner. Spin the pulleys by hand where possible and listen for roughness. Correct any fault before installing the belt, then tension it to the drive manufacturer's specification and recheck after the first run-in.
The belt is marked Dayco 22395, with 15A1005 as an alias, and its effective length is 1003.3 mm. If you are replacing an existing belt, read the marking on the back and compare it with these figures. Send us the part number and, if you have it, the old belt marking or a photo, and we will confirm the match or suggest an equivalent.
Dimensions
- Length
- 1003.3mm
Frequently asked questions
- What are the dimensions of the Dayco 22395 belt?
- It has an effective length of 1003.3 mm, a width of 17.53 mm and a 38-degree angle. It is an automotive V-belt.
- What should I check before installing this belt?
- Inspect the sheaves for wear, rust, burrs and misalignment, and check bearings, mountings and tensioners. Correct any issue before fitting the new belt, then tension it to the drive manufacturer's specification.
- How do I request a quote for the Dayco 22395?
- Send the part number 22395, or the alias 15A1005, by WhatsApp or email. If you can, include the old belt marking or a photo so we can confirm the right belt or suggest an equivalent.