EMMAR 10-C1 roller chain

EMMAR 10-C1 belongs to roller chain, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 10-C1 and any equivalents.

The 10-C1 is a single-strand roller chain built to the European BS standard, featuring a 5/8" pitch. It is used to transmit motion between separated shafts in industrial machinery, with a roller diameter of 10.16 mm and an inner width of 9.65 mm. The chain comes in bulk or as assembled sections with a specified number of pitches, and the joint can be clip or rivet type depending on the application.

In the code 10-C1, the number 10 corresponds to the 5/8" pitch under the BS standard, while C1 indicates a single row of rollers. The 10.16 mm roller diameter and 9.65 mm inner width make this chain appropriate for moderate duty cycles. It is supplied by the meter or as a closed section, and you can specify a clip or rivet joint when ordering.

Typical uses for a single-strand BS chain like the 10-C1 include low- and medium-power drives in machine tools, light conveyors, packaging equipment, automatic gates and lifting mechanisms. It also appears in food processing and assembly lines where a positive drive without slipping is required, and it can operate at moderate speeds with proper lubrication.

When selecting a 10-C1 chain, verify the sprocket pitch, tooth count and center distance. The chain should mesh smoothly, without jumps or unusual noise, and with enough tension to allow slight play. Check alignment between sprockets carefully. Regular lubrication and inspection for stretch help extend the life of the assembly.

To request a quote for part number 10-C1, provide the pitch, number of strands and length in pitches. With that information, a chain of the same standard can be offered. Sprockets and connecting links can also be quoted to complete the drive.

For a quote on this 10-C1 chain or other sizes in the BS series, contact MR Industrial Accessories via WhatsApp or email with the part number and the number of pitches required. The technical team will respond with the options and details needed to complete your order.