TIMKEN deep groove ball bearings, 60 series: dimensions and part numbers

In 39 of the 48 sizes the basic designation is also listed on its own, without a suffix. The most frequent TIMKEN suffixes, with the number of sizes they appear in: MB (15), MBMB (7), M (2), and MA (2). The suffix defines the variant (sealing, cage, internal clearance or other options): to request a quote, send us the full part number marked on the bearing, the box or the drawing.

How to read the part number: 60 gives the bearing type and the dimension series; for the same bore, each series has a different outside diameter and width. What follows is the bore code: from 04 upwards, multiplying by 5 gives the bore in millimetres (in the 6006, 06 × 5 = 30 mm); 00, 01, 02 and 03 stand for 10, 12, 15 and 17 mm; when the code ends in a single digit, that digit is the bore in millimetres (in the 603, 3 mm).

The table gives the boundary dimensions of each basic designation according to ISO 15, in millimetres: d is the bore, D the outside diameter and B the width. These are standardised dimensions: the same basic designation has the same dimensions in every brand. Where a dash appears, the dimension has not been validated yet: we confirm it when we quote.

If the part number on the bearing can no longer be read, measure the bore, the outside diameter and the width, and find the matching row: with that size and the variant you need, we will quote it.