LINK-BELT Bearing housings

A LINK-BELT ZA series pillow block is a solid, single-piece housing that carries the bearing and anchors it to the machine frame. It suits applications where the shaft runs on a flat mounting surface and needs accurate positioning, with solid capacity for radial loads and moderate thrust. MR Industrial Accessories LLC supplies this line to plants across the United States and to several countries in Latin America.

LINK-BELT ZAS pillow blocks are mounted bearing units that fasten to a structure through two base holes. They support rotating shafts in transmission and conveying equipment where firm mounting and straightforward alignment are needed. MR Industrial Accessories LLC supplies this line and provides technical guidance to match the correct variant to your application.

Flex-block units from Link-Belt are mounted pillow block bearings that arrive as one assembly: bearing and housing joined and ready to bolt down. They carry rotating shafts in conveying and transmission equipment, where shaft alignment and sealing matter. MR Industrial Accessories LLC supplies this line to customers throughout the United States and Latin America.

A 3-bolt flange mounted bearing unit from LINK-BELT, series 200, the P3U bracket carries the housing and the insert bearing as one assembly. It suits rotating shafts on equipment that calls for front mounting across three anchoring points, including belt conveyors, mixers, pumps and fans. MR Industrial Accessories supplies this LINK-BELT line and helps you match the right size to your application.

For shafts that need to be tied into a metal frame or masonry wall, the LINK-BELT CL series flange Y-bearing unit combines a three-bolt flange housing with a self-aligning insert bearing. The three-bolt pattern holds the unit firmly and spreads the load over the mounting face, while the insert absorbs small alignment errors. Typical duties include conveying, ventilation, washing equipment and process lines where support is simple and service access matters.

This 3-bolt flange mounted bearing unit combines a P3S housing with a LINK-BELT insert bearing. It supports rotating shafts where the flange bolts to a surface perpendicular to the shaft, such as chassis walls or side panels of machines. The three bolts hold the unit firmly and spread the load into the structure.