Tapered roller bearings
10,414 manufacturer part numbers.
Find your part number in Tapered roller bearings
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Top searched part numbers
The part numbers people look up most on Google. Each one opens a product page with dimensions and a WhatsApp quote button.
- SKF 30205 J2/Q
- SKF 32005 X
- SKF 32228
- SKF 30206
- SKF 30207 J2/Q
- SKF 30208
- SKF 32007 J2/Q
- SKF 30203
- SKF 32210
- SKF 33208
- SKF 30214
- SKF 30306
- SKF 30202
- SKF 30220
- SKF 32212
- SKF 30209
- SKF 30309
- SKF 32010 X
- SKF 32222
- SKF 32306
- SKF 33215
- SKF 33216
- SKF 33111
- SKF 32026 X
- SKF 30319
- SKF 30317
- SKF 32216
- SKF 30205/VA983
- SKF 32005 X/Q
- SKF 32005 X/VA983
A tapered roller bearing carries combined radial and axial loads, with thrust in one direction only. The cone and cup come apart, are installed separately and have their clearance set during assembly, which makes the arrangement stiff. Wheel shafts, gearboxes and transmissions, differentials, pumps and construction equipment use them, nearly always as opposed pairs.
Designations change from brand to brand. Under the ISO metric system, part numbers like 30203-XL (FAG), 4T-30203 (NTN) or HR 30206 J (NSK) begin with the 302, 303, 320, 322 or 329 series. From 04 up, multiply the last two digits by 5 for the bore: 30206 has a 30 mm bore. Timken uses letter codes for construction type, with TS and TSF for single row and TDI and TDO for double row. For SKF sets such as 305269 D or 305183, the number identifies the whole set and is quoted as such.
Weigh the direction and size of the thrust load, the speed, the shaft and housing fits, and the preload or end play the arrangement needs. A steeper contact angle carries more thrust, and double row designs handle shafts loaded in both directions. When replacing, order cone and cup as a matched pair, with the full part number of each.
Brands we carry: Timken, NSK, NTN, FAG and SKF. For a quote, send us by WhatsApp the cone and cup part numbers, or the bore, outside diameter and width, plus the bearing you are replacing. We'll quote it and show you the equivalents across brands.
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Tapered roller bearings by part number
Send us the part number. We'll quote it fast.
A photo of the part, a part number jotted on paper, a drawing or a spreadsheet: send whatever you have.
Tell us the quantity you need and request a quote by WhatsApp or email.