SKF 32007 J2/Q tapered roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 32007 J2/Q
- 320Series
- Tapered roller bearings, 320 series. Series differ in outside diameter and width even when the bore is the same.
- 07Bore
- Bore 35 mm (07 × 5).
- J2/QSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
32007 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 32007 J2/Q measures 35 mm across the bore and 62 mm across the outside diameter; its total width is 18 mm (35 x 62 x 18 mm).
SKF 32007 J2/Q belongs to tapered roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32007 J2/Q and any equivalents.
Tapered roller bearings from SKF handle radial and axial forces at the same time. The cone-and-cup arrangement creates linear contact between rolling elements and raceways, which spreads the load across a wider area. That makes them a common choice where a shaft needs accurate guidance while pushing or pulling along its axis. We supply this line and can help you match a part number to your equipment.
Reading the designation tells you a lot before you open a catalog. The leading digits group the bearing by type and dimension series: 302 covers general duty, 303 steps up in capacity, and 320 comes in a narrower section. After the series, the J2/Q suffix describes internal details — J for a stamped steel cage, 2 for a cage variant, and /Q for a tolerance class set by standard. Ordering the exact replacement starts with understanding those characters.
You will find these bearings in gearboxes and reducers, wheel axles, farm implements, earthmoving machines, conveyors and lifting equipment. Pumps, fans and machine tool spindles also use them. Because they take combined loads, they suit assemblies where the shaft must stay precisely located and still carry moderate to heavy thrust.
Selection comes down to four inputs: the radial load, the axial load, the running speed and the space available in the housing. During mounting, alignment matters, and many arrangements need a controlled axial setting to reach the specified internal clearance. Lubrication — grease or oil, depending on the duty — plus effective sealing against dirt and moisture are what keep the bearing running through its expected life. In dusty or wet locations, pay particular attention to seal choice and to cleanliness at installation.
Interchange is possible in principle: tapered roller bearings are built to international standards, so part numbers from different makers can line up when dimensions and tolerances agree. Suffixes are where the trouble hides, since cage design, heat treatment or precision class may differ and change how the bearing performs. Check the critical dimensions and the actual service conditions before swapping one brand for another. Our team can walk you through that comparison.
If you have the part number, send it over WhatsApp or email and we will prepare a quote. We also suggest equivalents and help you confirm the right replacement, whether the answer is an SKF tapered roller bearing or another power transmission component.
Dimensions
35 x 62 x 18 mm (d x D x T): boundary dimensions for basic designation 32007, according to ISO 355.
- Bore
- 35mm
- Outside diameter (D)
- 62mm
- Total width (T)
- 18mm
Same size, other brands
Other brands' pages with basic designation 32007: 35 x 62 x 18 mm (d x D x T) per ISO 355.
- FAG32007-X-XL
- RKB32007
- TIMKEN32007X
What they share are the ISO 355 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 32007 J2/Q bearing: what are its dimensions?
- SKF 32007 J2/Q measures 35 mm across the bore and 62 mm across the outside diameter; its total width is 18 mm (35 x 62 x 18 mm). Those are the boundary dimensions standardized in ISO 355 for basic designation 32007.
- What does J2/Q mean on an SKF bearing?
- It describes internal features. J is a stamped steel cage, 2 is a cage design variant, and /Q is a manufacturing tolerance per standard. These details affect how the bearing performs, so keep them in mind when substituting a part.
- Is it safe to use another brand instead of an SKF tapered roller bearing?
- Often yes, provided the main dimensions and tolerance class match. International standards support interchange between makers, but suffixes can differ in cage or heat treatment, so verify them along with your operating conditions.
- How can I identify the tapered roller bearing my equipment needs?
- Look for the part number marked on the old bearing, or measure bore, outer diameter and width. Load and speed also factor in. Send those details on WhatsApp or by email and we will help you narrow down the model.