TSUBAKI TL350-1C torque limiter
- Brand
- TSUBAKI
- Category
- Power transmission
- Subcategory
- Torque limiters
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
TSUBAKI TL350-1C belongs to torque limiter, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for TL350-1C and any equivalents.
TSUBAKI TL series torque limiters are protective devices fitted into power transmission systems. When torque rises above a defined threshold, they release the drive so the machine stops transmitting force. This limits damage to gears, chains and couplings, cuts unplanned downtime and helps keep operators safe. We supply this line and can assist with model selection for your application.
Reading a TL part number is straightforward once you know the pattern. The number in the middle sets the torque capacity within the series, while the suffix tells you how many channels or rows the output flange has. So TL10-C is a size 10 unit with a single flange, TL200-C and TL200-1C are both size 200, and TL250-2C carries two channels. Always confirm the code against the manufacturer's performance table before ordering.
Typical installations include packaging lines, conveyors, mixers, mills, pumps, fans and machine tools, as well as material handling equipment and chain or belt drives that need jam protection. In food, chemical, cement and automotive plants, an overload can break gears, chains or couplings, which is exactly what these limiters are meant to prevent.
Selection starts with three figures: normal working torque, trip torque and maximum revolutions. From there, check shaft diameter and type, the fastening method and the space available. Correct alignment between shafts and suitable lubrication for the environment matter during installation. In dusty or damp conditions, consider extra protection. Reset the torque with the limiter disengaged and follow the manufacturer's procedure.
Equivalent units from other brands may fit, but interchangeability comes down to mounting dimensions, torque and flange type. A matching part number alone is not enough, since trip curves, tolerances and accessories also have to line up. Validating the application with a specialist before you swap out an existing unit is the safer route.
If you already know the part number you need, send it to us on WhatsApp and we will get your quote started.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the -1C or -2C suffix mean on TSUBAKI TL series torque limiters?
- It shows how many channels or rows the output flange has. TL200-1C has one channel, for instance, while TL250-2C has two. Mounting and transmission capacity differ between them, so send us your machine model or the flange you need and we will point you to the right one.
- How is the trip torque of a torque limiter adjusted?
- With the limiter disengaged from the load, following the manufacturer's procedure. Spring preload is adjusted until the target torque is reached, and the value should be checked with a torque wrench or the specified device. Never change the setting while the machine is running.
- What data do I need to request a quote for a TSUBAKI torque limiter?
- The full part number if you have it, plus normal and trip torque, working revolutions, shaft diameter and type, and the mounting space. With that information we can identify the equivalent model and send your quote on WhatsApp.