TSUBAKI RS80-LMD-1 roller chain
- Brand
- TSUBAKI
- Category
- Power transmission
- Subcategory
- Roller chains
- Size
- ASA 80
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
TSUBAKI RS80-LMD-1 belongs to roller chain, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for RS80-LMD-1 and any equivalents.
TSUBAKI RS-LMD series roller chain belongs to the Lambda line and is built for power transmission where adding oil is not practical. It suits drives where lubricant drip cannot be tolerated or where reaching the chain for service is difficult.
Reading the code is straightforward. RS stands for the ANSI-pitch roller chain. The digits after RS give the pitch size, such as RS40, RS50, RS60 or RS80. LMD marks the Lambda version that runs without extra lubrication. The final digit tells you the strand count: -1 for single, -2 for double.
Typical installations include plant power transmissions, packaging lines, bakery equipment, industrial laundries, conveyors and textile machinery. Food, chemical, ceramic and surface treatment operations often choose this chain because cleanliness matters and loose lubricant is a problem. Moderate speeds and variable loads are common in these drives.
When specifying, check the pitch, whether you need one or two strands, the sprocket tooth counts and the center distance. The chain arrives pre-lubricated and does not call for oiling afterward, which keeps maintenance simple. Confirm sprocket alignment and correct tension to prevent early wear. In dusty or damp locations, add protection as needed.
RS-LMD chains interchange with other ANSI-pitch roller chains when pitch, strand count and lubrication type are the same. During replacement, compare the complete part number and the key dimensions. MR supplies this brand within its power transmission range and can help you match it to the chain currently in service.
For a quote on a TSUBAKI RS-LMD series chain, send the full part number to MR by WhatsApp or email. Include the model and quantity, and the team will respond promptly. You can also ask about other Lambda line options or standard roller chains.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does LMD indicate in the TSUBAKI RS-LMD chain?
- LMD identifies the Lambda variant without additional lubrication. The chain comes pre-lubricated from the factory and does not require oiling during normal service.
- How do I decide between single and double strand?
- It depends on the load to be transmitted and the space available. The single version (-1) handles light and medium drives; the double version (-2) offers greater capacity at the same pitch. Contact MR for guidance on your application.
- Can they replace other brands?
- Yes, they interchange with equivalent ANSI-pitch roller chains when pitch, number of strands and lubrication type match. Verify the part number and dimensions before replacing.