TIMKEN MSE1100 split plummer block housing
- Brand
- TIMKEN
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- MSE
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
TIMKEN MSE1100 belongs to split plummer block housing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for MSE1100 and any equivalents.
Timken MSE series split housings are two-piece units designed to hold split cylindrical roller bearings. They are the practical choice when a shaft cannot be pulled out: you place the halves around the shaft and bolt them together, which cuts maintenance time on large machines. MR Industrial Accessories LLC supplies these housings from Miami to customers throughout the United States and Latin America, and can help you match the right size to your application.
The MSE code works as a size family. The letters mark the series, and the digits that follow tell you the size. Smaller options include MSE111, MSE112 and MSE115. Larger sizes include MSE200, MSE203, MSE204, MSE207 and MSE208. Because each part number fixes both the shaft diameter and the housing dimensions, the safest way to get an exact match is to quote with the full part number.
These housings suit plants where shafts are heavy and taking them apart is expensive. You will see them in cement and aggregate operations, mining, steel mills, pulp and paper, and heavy transport equipment. Typical equipment includes mills, conveyor belts, high-flow pumps and industrial fans. The split construction lets you change the bearing without shifting the shaft or breaking the drive connection, so downtime stays short.
When selecting a housing, look at shaft diameter, load and the surrounding environment. Sealing deserves close attention: pick the right protection if dust, water or washdowns are present. Use the lubricant specified for the bearing and refresh it according to the duty cycle. At assembly, verify that the halves line up and tighten the bolts in a cross pattern to the recommended torque. This avoids distortion and early failure.
Timken split housings can replace other brands that follow the same mounting standard and dimensions. For a replacement, compare the existing part number against the MSE series and confirm the equivalents. MR Industrial Accessories LLC can help you find a compatible option without machining the shaft or the base. Interchangeability depends on mounting dimensions and bearing type, not on diameter alone.
To request a quote, send the housing part number by WhatsApp or email, for example MSE111 or MSE208, or a photo of the equipment nameplate. The team replies promptly and can suggest equivalents or help you choose. If you need a variant you do not see listed, send the model and we will point you to a solution.
Dimensions
- Número de producto
- 331818
- Bore
- 300 mm
Frequently asked questions
- What does the MSE series indicate in Timken housings?
- MSE identifies split housings for split cylindrical roller bearings. The letters define the family and the numbers define the size. For example, MSE111 and MSE200 are different sizes. The complete part number sets the shaft diameter and housing dimensions.
- How do I determine which housing fits my equipment?
- You need the shaft diameter, the bearing type and the working conditions. If you have the original part number, send it via WhatsApp and we will quote the equivalent. You can also send a photo of the nameplate or the old housing for identification.
- Are MSE housings interchangeable with other brands?
- In general, yes, with other split housings that share the same mounting dimensions and bearing type. Diameter alone is not enough; check the fastening and the housing. MR helps you find the compatible alternative.