TIMKEN M236849 tapered roller bearing cone
- Brand
- TIMKEN
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
TIMKEN M236849 belongs to tapered roller bearing cone, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for M236849 and any equivalents.
A tapered roller bearing cone is the inner ring that carries the rollers and sits on the shaft, while the cup forms the outer race in the housing. The two parts work as a pair to take radial and axial loads in one direction. MR supplies TIMKEN bearings to maintenance and purchasing teams across the United States and Latin America.
Codes in the M series begin with the letter M and continue with digits, such as M12648, M38545, M84249 or M84549. Each code points to a particular size and race angle. The matching cup often starts with the same prefix but ends with a different number, so the safest way to order a replacement is to give both the cone code and the cup code.
These cones appear in gearboxes, road machinery axles, conveyor rollers, machine tool spindles and vehicle hubs, where loads are combined and some misalignment is present. They are also common in food plants, cement plants, tanneries and agricultural machinery workshops, always as half of a cone-cup pair set to a controlled clearance.
When selecting, check the shaft diameter, the overall assembly width and the sealing arrangement the housing allows. The cone is fitted with interference on the shaft and lubricated with grease or oil as the application requires; the cup is fitted in the housing. Axial clearance is set during assembly, and aligning the two races matters so the rollers do not concentrate load at the edges.
Tapered roller bearings are identified by manufacturer code and by main dimensions. Interchange between brands can work when inner diameter, outer diameter, width and race angle all agree, but mixing a cone from one brand with a cup from another is not recommended unless the full pair has been checked. If you need an alternative, send the code and we will point out a compatible option.
If you have the cone code, the shaft size or a photo of the part, send it by WhatsApp or email. The team replies promptly and can also help with the cone-cup pair, sealing and lubrication for your equipment.
Dimensions
- Bore
- 177.800 mm
Frequently asked questions
- What is the difference between the cone and the cup of a tapered bearing?
- The cone is the inner race, mounted on the shaft, and it holds the rollers. The cup is the outer race, mounted in the housing. They should be replaced as a pair; changing only one part can put contact and clearance out of tolerance.
- How do I order the TIMKEN M series cone I need?
- Send the complete cone code by WhatsApp, for example M12648 or M84549, and the cup code if you have it. With that information we will quote promptly and confirm whether the complete pair is needed.
- Can a TIMKEN cone be replaced with one from another brand?
- Yes, if inner diameter, outer diameter, width and race angle match. Do not mix cone and cup from different brands without verifying the pair. Send us the code and we will indicate the compatible alternative.