TIMKEN LM67010 tapered roller bearing cup
- Brand
- TIMKEN
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
TIMKEN LM67010 belongs to tapered roller bearing cup, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for LM67010 and any equivalents.
The TIMKEN LM series tapered roller cup is the outer race of a tapered roller bearing that presses into the housing. It works together with the cone, which carries the rollers and inner race, to handle radial and axial loads at the same time. You will find this cup in wheel hubs, gearboxes, drive shafts and other industrial equipment where rigidity and load capacity matter.
The LM prefix in part numbers such as LM11710, LM11910, LM11919, LM12710, LM12711, LM29710, LM29711 and LM48510 indicates the series family. The remaining digits define the cup's size and proportions. Always order using the complete part number from the old bearing or the drawing.
These cups are common in commercial vehicle wheel hubs, agricultural machinery, gearboxes, reducers, drive shafts and earthmoving equipment. Because the tapered geometry supports radial and axial loads in one direction, cups are typically mounted in opposed pairs to fully support the shaft.
When selecting a cup, match its outer diameter and race width to the housing bore. The cup is press-fitted into the support, so check alignment with the cone and set axial clearance per the equipment manual. Correct lubrication and sealing keep contamination out and help the bearing last. For wheel hub installations, follow the manufacturer's tightening and preload procedure.
TIMKEN LM series cups can be interchanged with equivalent components from other brands that use the same designation and dimensions. Interchangeability depends on the cone and cup sharing the same series number and being made to equivalent standards. When requesting a quote, provide the complete part number and, if possible, the series number of the original bearing.
To get a quote for a TIMKEN LM series tapered roller cup, send the part number from your equipment or drawing via WhatsApp or email. If you only have housing and cone measurements, we can help identify the correct reference. We also suggest equivalents when needed.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What is the difference between a cup and a cone in tapered roller bearings?
- The cup is the outer race that mounts in the housing. The cone is the inner assembly with rollers and cage that fits on the shaft. Both must be of the same series to work correctly.
- How do I identify the part number of the cup I need?
- The part number is usually engraved on the cup or cone. You can also measure the outer diameter and race width. Send that data via WhatsApp and we will tell you the corresponding TIMKEN LM series reference.
- Are TIMKEN LM series cups interchangeable with other brands?
- Yes, as long as the designation and dimensions match the original bearing. Interchangeability between brands is based on dimension standards. Ask us with the part number and we will confirm the equivalent.