TIMKEN KML38 lock nut
- Brand
- TIMKEN
- Category
- Bushings and sleeves
- Subcategory
- Lock nut
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
SKF and TIMKEN: matching part numbers →FAG and TIMKEN: matching part numbers →TIMKEN and BGL: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
TIMKEN KML38 belongs to lock nut, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for KML38 and any equivalents.
The TIMKEN KML lock nut is a precision component designed to hold bearings firmly in place on a shaft. It allows for straightforward mounting and removal without harming the shaft or bearing, which simplifies maintenance tasks. MR Industrial Accessories LLC offers this lock nut as part of its range of power transmission and mounting products.
The KML code works like this: KML is the series, and the number that follows tells you the nominal shaft diameter. For instance, KML24 fits an M120×2 thread, while KML26 is for M130×2. This straightforward numbering system lets you match the nut to your shaft size and the bearing you need to secure.
These lock nuts are found in many industries, including metallurgy, food processing, petrochemical and mining. They are common on transmission equipment, pumps, fans, conveyor belts and agricultural machinery, where bearings must be held tight to handle loads and vibration. In applications demanding high reliability and infrequent maintenance, their role is critical.
When choosing a nut, consider the shaft diameter and the bearing type. Check the thread and pitch, and decide on the locking method—whether a lock washer or set screw. During installation, clean the threads and apply the specified torque to avoid loosening. Lubrication and proper alignment of the assembly also affect how well it performs and how long it lasts.
TIMKEN KML series lock nuts can be swapped with similar products from other makers that use the same thread standard and dimensions. Always confirm the technical details and check with our team to ensure compatibility. MR Industrial Accessories LLC supplies this brand as part of its selection of mounting and transmission components.
If you need a lock nut for your application, send us the code or shaft dimensions on WhatsApp. MR Industrial Accessories LLC will provide a prompt quote and help you find the right solution. We can also suggest compatible alternatives if you are looking for a specific variant.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I choose the right KML nut for my shaft?
- Measure the shaft diameter and pick the number after KML. For example, KML30 corresponds to an M150×2 thread. Also check the thread pitch and the bearing type. If you need help, contact us on WhatsApp.
- What locking method is recommended for these nuts?
- They are typically used with lock washers or set screws, depending on the bearing design. Follow the equipment manufacturer's recommendations to ensure correct mounting and prevent loosening from vibration.
- Are TIMKEN KML nuts compatible with other brands?
- They can be interchangeable with nuts from other brands that have the same dimensions and thread standard. We recommend finding the right equivalent for your application. Write to us with the code or dimensions.