TIMKEN JP13010 tapered roller bearing cup

TIMKEN JP13010 belongs to tapered roller bearing cup, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for JP13010 and any equivalents.

The outer race of a tapered roller bearing is what the TIMKEN JP series cup provides. It seats in the housing bore and, paired with its matching cone, carries loads that arrive both radially and axially. Typical homes for this cup include gearboxes, wheel hubs, farm equipment and general industrial machinery where rigidity and load capacity matter.

Reading the code helps narrow the search. The JP prefix marks the TIMKEN tapered cup family, and the digits that follow set the size: JP6010, JP7010 and JP8010 all share the prefix but differ in outer diameter and width, with larger numbers pointing to greater capacity. The suffix itself says nothing about contact angle or surface finish, so that information has to come from the catalog. Before ordering, know which cone will run against the cup and what the housing bore allows.

These cups suit arrangements that see combined loads and tilting moments. You will find them in mill and press gearboxes, cranes, road-building machines, seeders, combine harvesters, conveyor rollers and mining equipment. They are also common where axial room is tight but a solid outer race is required. Since the cup lifts out on its own, a worn race can be swapped while the cone is still serviceable, which keeps maintenance spending down.

Selection comes down to dimensions and pairing. The outer diameter and width have to match both the housing and the cone it will run with, and cup and cone must come from the same series so the rollers contact correctly. Fit the cup with a press or by warming it in oil; never drive it in with a hammer. Housing and shaft alignment has to be right to prevent eccentric loading. Use the correct lubricant, add sealing where dust or moisture is present, and set internal clearance as specified, since a poor adjustment cuts service life.

TIMKEN is a well-known name in tapered roller bearings, and this cup is part of the bearing range MR supplies. When chasing a replacement, don't go by the code alone: check outer diameter, cup width and fillet radius, plus the load rating. Cups from other makers may work, but only if those dimensions and the contact angle line up. Send us the original code if you are unsure and we will point you to a compatible option.

Need a TIMKEN JP series cup? Message us on WhatsApp with the code or your housing dimensions. We quote quickly and help you get the mounting right, and we can also identify a part from a photo or the number etched on the cup.