TIMKEN JHM522649A tapered roller bearing cone
- Brand
- TIMKEN
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
TIMKEN JHM522649A belongs to tapered roller bearing cone, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for JHM522649A and any equivalents.
For equipment that must handle both radial and axial forces at once, the TIMKEN JHM series tapered roller bearing cone is a reliable choice. It appears in gearboxes, mining machinery, cranes and heavy transmissions where stiffness and load capacity matter. MR Industrial Accessories LLC supplies this brand and can guide you in matching the right cone to your shaft and housing.
Reading the JHM code helps you identify what you are ordering. The J points to a tapered roller series with a defined dimension system, HM signals a heavier roller cross-section, and the trailing A marks a design variation such as a particular contact angle or corner radius. Take JHM522649A: the digits in the middle set the size and load rating. If you need help decoding a specific number, our team can walk you through it.
These cones show up in demanding settings: speed reducers, mills, conveyor systems, port cranes, road-building equipment and agricultural implements. Their geometry lets them take radial and axial loads simultaneously, which suits transmission shafts and support rollers. TIMKEN is known for holding up under severe conditions.
Choosing the right cone comes down to the radial and axial loads, the rotation speed and the space you have. During mounting, the cone and cup must be aligned precisely; any misalignment speeds up wear. Lubrication—grease or oil depending on the application—and good sealing against contaminants are what keep the bearing running. Follow the manufacturer's guidance on internal clearance and fits.
TIMKEN tapered roller bearings can be replaced with equivalents from other makers that share the same dimensional and load capacity standards. Always confirm cone and cup dimensions plus the contact angle before substituting. We help you locate a compatible alternative that won't compromise your equipment.
To request a TIMKEN JHM series tapered roller bearing cone, send the part number or model through WhatsApp. We will quote it promptly and suggest a compatible option if needed.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the JHM designation mean in TIMKEN bearings?
- The J stands for a tapered roller series with specific dimensions, HM indicates a heavier roller section, and the final A identifies a design variant. These codes help you identify the cone's size and characteristics.
- How do I choose the right tapered bearing cone for my equipment?
- Look at the radial and axial loads, the operating speed and the mounting space. Check alignment and lubrication. If you are unsure, send your equipment's part number on WhatsApp and we will advise you.
- Do TIMKEN bearings have equivalents in other brands?
- Yes, they can be interchanged with bearings from other brands that meet the same dimensional and load capacity standards. Verify dimensions and contact angle. We can point you to a compatible alternative.