TIMKEN JF6049/JF6010 tapered roller bearing
- Brand
- TIMKEN
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
TIMKEN JF6049/JF6010 belongs to tapered roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for JF6049/JF6010 and any equivalents.
TIMKEN JF series tapered roller bearings are two-row assemblies designed to carry radial and axial loads in a single direction. They suit equipment where combined forces and shaft alignment are critical, such as gearboxes, power transmission systems and process machinery. MR Industrial Accessories LLC supplies this line.
The part number is structured as a cone and cup pair: the first code denotes the cone, the second the cup. For instance, JF4049/JF4010 means cone JF4049 is used with cup JF4010; the same pattern applies to JF6049/JF6010, JF7049/JF7010 and JF9549/JF9510. This pairing defines the assembly and should not be interchanged with other references. If you need help decoding the designation, send us the code from your equipment and we will quote it.
Typical applications include power transmission equipment, gearboxes, axles on road machinery, mills and conveyors. In food, cement, mining and agricultural plants, these bearings are chosen for their ability to withstand demanding loads and operating conditions. TIMKEN is a recognized name in tapered rollers, and MR Industrial Accessories LLC supplies it so you can source the correct replacement part number.
Selection depends on the radial and axial loads, rotational speed and lubrication method. Proper mounting requires clean surfaces, checking the fit on the shaft and in the housing, and ensuring correct alignment to prevent parasitic forces. Lubrication may be grease or oil as specified by the equipment manufacturer; follow the recommended quantity and interval. Effective sealing helps extend service life in dusty or humid environments.
When replacing a tapered bearing, confirm that the cone and cup codes match the original. Cross-brand equivalents exist but are not automatic: each manufacturer uses its own nomenclature and tolerances. If you cannot locate the exact reference, contact us on WhatsApp with the bearing part number or dimensions and we will suggest a compatible alternative. We work with leading brands and can assist with selection.
To request a quote for a TIMKEN JF series tapered roller bearing, send the complete part number via WhatsApp or email to MR Industrial Accessories LLC. We will reply promptly with options for your equipment. You can also inquire about other bearing lines, housings and power transmission components we supply.
Dimensions
- Bore
- 60.000 mm
Frequently asked questions
- How can I tell if a bearing belongs to the JF series?
- JF series bearings have a designation consisting of two codes separated by a slash, such as JF4049/JF4010. The first code is the cone, the second is the cup. If your bearing follows that format, it is from this series.
- What is the difference between the cone and the cup?
- The cone is the inner ring assembly with rollers and cage; the cup is the outer ring. They are installed as a matched set and should be replaced together, keeping the original combination. Interchanging a cone from one reference with a cup from another is not advised.
- Can I substitute a TIMKEN bearing with another brand?
- Yes, cross-brand equivalents exist, but they are not direct replacements. Dimensions and tolerances must be compared. If you send us the original part number on WhatsApp, we will identify a compatible alternative from our supply.