TIMKEN HM231115EC tapered roller bearing de doble hilera
- Brand
- TIMKEN
- Category
- Bearings
- Subcategory
- Tapered roller bearings
- Series
- 2TS-IM
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
TIMKEN HM231115EC belongs to tapered roller bearing de doble hilera, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for HM231115EC and any equivalents.
The TIMKEN HM…EC series covers double row tapered roller bearings. In this design, two rows of tapered rollers sit in one assembly, so it takes radial and axial loads in both directions. Equipment such as gearboxes, drive shafts and mining machinery relies on this combination of capacity and rigidity.
Reading the code helps you find the right replacement. HM marks the dimension and capacity series in the TIMKEN catalog. EC points to the assembly configuration, usually tied to the cage type and internal design. A case in point is HM231115EC, which falls under the 2TS-IM series. With the nomenclature clear, matching a part number or an equivalent goes faster.
These bearings turn up in demanding drives: gearboxes, reducers, mills, presses, and machinery for cement, mining and steel. They also appear on conveyor roller shafts and machine tool spindles where rigidity and precision matter. Because they handle combined loads, they suit arrangements that must guide the shaft with little deformation under stress.
Selection starts with the radial and axial loads, the rotation speed and the operating environment. Sealing deserves attention: where dust, moisture or particles are present, extra protection is advisable. The lubricant has to match the working temperature. Mounting calls for precise alignment and correct adjustment of axial clearance, since tapered rollers do not tolerate large angular misalignment. Careful installation extends the life of the assembly.
TIMKEN double row bearings can be interchanged with other brands that follow the same dimension and load capacity standard. Interchangeability normally rests on bore, outer diameter and overall width, yet the contact angle and internal configuration must be checked, as they are not always identical between manufacturers. Comparing technical specifications and consulting a specialist is the safe route to an equivalent.
To request a quote, send the part number or model by WhatsApp or email. The team replies promptly and can point to a compatible alternative. Advice on mounting and lubrication is also available so the installation starts out reliable.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the HM…EC designation mean on this bearing?
- HM…EC identifies a family of double row tapered bearings in the TIMKEN catalog. HM indicates the dimension and capacity series, while EC refers to a specific assembly configuration, such as the cage type. The complete part number includes numbers that define the size.
- Is this bearing suitable for axial loads in both directions?
- Yes. Double row tapered roller bearings are made to take radial and axial loads in both directions. Two opposed rows let them handle combined stresses, which suits demanding applications such as reducers and mining equipment.
- How do I request a quote for a TIMKEN HM…EC bearing?
- Send the complete part number or the model you need by WhatsApp or email. The team replies promptly and, if needed, suggests a compatible alternative. Advice on mounting and lubrication is also available.