TIMKEN AOHX31/500G withdrawal sleeve

TIMKEN AOHX31/500G belongs to withdrawal sleeve, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AOHX31/500G and any equivalents.

The TIMKEN withdrawal sleeve is used to mount and dismount spherical roller bearings with a tapered bore. It fits onto the shaft and allows the bearing to be removed without damaging the inner ring or the seat, which is useful for maintenance work that needs to be clean and repeatable on critical equipment.

The AOHX...G series code is read in parts: AOHX identifies the withdrawal sleeve family, the following number gives the size, and the final G indicates a metric thread. For example, AOHX30/500G, AOHX31/500G and AOHX32/500G show how the first numeric block relates to the bearing series, while AOHX3088G, AOHX3092G and AOHX3096G correspond to specific bores. To choose the right sleeve, the bearing part number and the shaft diameter are the key data.

These sleeves are found in cement, mining, steel, paper, sugar and aggregate processing plants, where spherical roller bearings run under high loads and misalignment. They also appear in gearboxes, mills, screens, fans and conveyors. In maintenance, they let you pull the bearing off the shaft without hammering or excessive heating, which helps avoid damage and reduces downtime.

When selecting a sleeve, confirm that the series number and shaft diameter match the bearing being removed. Clean and lubricate the thread before threading the hydraulic or mechanical nut. During mounting, check alignment and apply force axially and gradually. If the bearing is sealed, make sure the sleeve does not interfere with the lip. Lubricating the thread and the tapered seat is important to prevent seizing.

Withdrawal sleeves from different brands can be interchanged if the series, shaft diameter and thread type match. A similar part number is not enough: the thread standard and cone dimensions must be compared. Interchangeability should always be checked against the bearing data sheet. If you are unsure, send the complete part number and we will point you to the compatible option.

To request a quote for your TIMKEN withdrawal sleeve, send the exact part number shown on the bearing or on the old sleeve by WhatsApp or email. We reply promptly with the alternative you need. If you cannot find the variant on the site, send us the model and we will take care of it. We support workshops and plants across the United States and in several Latin American countries.