TIMKEN 626 deep groove ball bearing
- Brand
- TIMKEN
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
- Series
- 600
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
SKF and TIMKEN: matching part numbers →NSK and TIMKEN: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding TIMKEN 626
- 62Series
- Deep groove ball bearings, 62 series. Series differ in outside diameter and width even when the bore is the same.
- 6Bore
- Bore: 6 mm.
626 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
TIMKEN 626 measures 6 mm across the bore and 19 mm across the outside diameter; its width is 6 mm (6 x 19 x 6 mm).
TIMKEN 626 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 626 and any equivalents.
A deep groove ball bearing handles radial and axial loads in both directions thanks to its single row of balls running between two rings. Friction stays low and speeds can be high, which is why this design shows up in motors, pumps, fans and many other rotating machines. MR Industrial Accessories LLC supplies Timken deep groove ball bearings to customers in the United States and several Latin American countries.
Reading the code is the first step in picking the right bearing. Three-digit numbers such as 603, 604 and 605 belong to the 600 series and grow in size as the number rises. The 6000 series uses four digits, for example 6000 and 6001. Thin-section or application-specific versions appear under series like 16000 and 61000. Letters added at the end tell you about features: 2RS means seals on both sides, ZZ means shields, and C3 points to internal clearance above normal.
These bearings are common in electric motors, centrifugal pumps, compressors, fans, conveyors and machine tools, as well as in agricultural, food-processing and textile equipment. Their ability to run at high speed while taking combined loads makes them a flexible choice across many plants.
When selecting a bearing, look at the radial and axial load, the rotating speed and the conditions around the machine. Seals keep contaminants out and lubricant in. Shielded versions suit clean areas, while sealed ones handle dirtier settings. Internal clearance should match the operating temperature and the fit. Good alignment and proper lubrication help the bearing reach a long service life, and clean mounting with the right tools avoids damage during installation.
Deep groove ball bearings with the same standard dimensions can be swapped between manufacturers. For a replacement, check the full code including any suffixes so the fit and function stay the same. SKF, NSK, FAG and Timken each list equivalent products under their own naming systems. Our team can help you confirm the correct reference and suggest alternatives when needed, which keeps maintenance simple and cuts downtime.
Dimensions
6 x 19 x 6 mm (d x D x B): boundary dimensions for basic designation 626, according to ISO 15.
- Bore
- 6mm
- Outside diameter (D)
- 19mm
- Width (B)
- 6mm
SKF and other brands, same size
Other brands' pages with basic designation 626: 6 x 19 x 6 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- TIMKEN 626 bearing: what are its dimensions?
- TIMKEN 626 measures 6 mm across the bore and 19 mm across the outside diameter; its width is 6 mm (6 x 19 x 6 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 626.
- What do the suffixes in Timken bearing codes mean?
- Suffixes describe specific features: 2RS for rubber seals on both sides, ZZ for metal shields, C3 for internal clearance greater than normal, and others. Include them when you request a replacement so the bearing performs as intended.
- How do I choose between a sealed and a shielded bearing?
- Sealed (2RS) gives more protection against dust and moisture, which suits contaminated environments. Shielded (ZZ) runs with lower friction and works well at high speed in clean areas. The decision depends on operating conditions and maintenance needs.
- Can I replace a bearing from another brand with a Timken one?
- Yes, if the dimensions and tolerances follow the same standard. Deep groove ball bearings are interchangeable between manufacturers. Check the complete code and send it to us on WhatsApp to confirm the exact equivalence.