TIMKEN 592AS tapered roller bearing cup
- Brand
- TIMKEN
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
TIMKEN 592AS belongs to tapered roller bearing cup, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 592AS and any equivalents.
When a tapered roller bearing needs its outer ring replaced, the TIMKEN AS series cup is the component that presses into the housing and provides the raceway for the rollers and cone. It appears in equipment that carries radial and axial loads together and where clearance is set during assembly. MR Industrial Accessories LLC supplies this cup to customers across the United States and in several Latin American countries, and can help you confirm the right part number.
The AS suffix sits after the base number that identifies each cup. Examples of this series include 393AS, 394AS, 453AS, 592AS and 3927AS. Every part number carries its own outside diameter, width and raceway angle, so one cup does not swap for another series. The stamped number on the cup is the reference that matters most when you order.
These cups are found where combined loads are present: gearboxes, transmission cases, axles on road construction and earthmoving machines, conveyors and agricultural equipment. They also show up in machine tool spindles and press rolls, where rigidity and correct clearance adjustment affect how long the assembly lasts.
Cup and cone are selected as a pair, not independently. Check the outside diameter, the width and the raceway angle before ordering. At assembly, press the cup into the housing with the right tooling and avoid striking the raceway. Grease or oil compatibility and good sealing also shape service life, so renew seals if contamination is present.
Tapered roller bearings are identified by part number and by standardized dimensions. Brands may interchange dimensionally when outside diameter, width and raceway angle agree, but suffixes do not always line up. To replace a TIMKEN cup with another brand, compare actual dimensions and ask a specialist. MR Industrial Accessories LLC can point you to a compatible alternative.
If you need an AS series cup, send the number stamped on the part by WhatsApp or email. The team replies promptly with a quote and, when applicable, a compatible alternative. They can also advise on the matching cone and on installation. Customers in the United States and Latin America rely on MR for bearing selection support.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What separates a cup from a cone in a tapered roller bearing?
- The cup is the outer ring that fits into the housing. The cone is the inner ring that carries the rollers. They are matched as a set, so the cup and cone part numbers must belong to the same series for the bearing to run correctly.
- How do I identify the cup I need?
- Start with the number stamped on the cup, and if needed measure the outside diameter and width with a caliper. Send that part number or those measurements via WhatsApp or email and the team will quote the corresponding AS series cup.
- Can a TIMKEN cup be replaced with another brand?
- Dimensional interchange is possible when outside diameter, width and raceway angle match. A similar number alone is not enough. Share the original part number and the team will indicate a compatible alternative or the TIMKEN cup you need.