TIMKEN 5535 tapered roller bearing cup

TIMKEN 5535 belongs to tapered roller bearing cup, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5535 and any equivalents.

The TIMKEN TS series tapered roller bearing cup is the outer ring of a tapered roller bearing that can be removed. It is pressed into the housing and provides the raceway for the rollers and cone. This cup is used where radial and axial loads occur together, such as in gearboxes, wheel axles, agricultural machinery and transmission equipment. MR Industrial Accessories supplies this line.

TIMKEN TS series cups are identified by a three- or four-digit number, for example 00150, 242, 332, 352, 362, 363, 372 or 374. Each part number corresponds to a cup with standard dimensions for outer diameter, width and raceway angle. In the TS series, the cup works with a specific cone to make a complete bearing. For that reason, when you request a quote, provide the cup part number and, if possible, the number of the matching cone.

These cups are found in industries such as food processing, cement, mining and metalworking. They appear in speed reducers, conveyors, mills, presses, pumping equipment and agricultural machinery, as well as in automotive and railway applications. Their design handles combined loads and slight misalignments, which suits demanding environments with vibration and temperature changes.

When selecting a TIMKEN TS series cup, consider the outer diameter and width required by the housing, and make sure the cup is mounted with the proper interference fit. Lubrication and sealing are critical: choose the lubricant based on speed and operating temperature, and maintain an oil or grease film that protects the raceways. Aligning the cone and cup avoids point loads. During mounting, use the right tools and do not strike the raceway.

TIMKEN TS series tapered roller bearing cups can be interchanged with those from other brands that share the same standard dimensions, such as SKF, FAG, NSK or NTN, provided the outer diameter, width and raceway angle match. Interchangeability depends not only on the part number but also on the combination with the cone. Therefore, before replacing a cup, verify that the cone-cup assembly keeps the tolerances and axial clearance recommended by the equipment manufacturer.

If you need a TIMKEN TS series tapered roller bearing cup, send us a WhatsApp message with the part number from the part or drawing. At MR Industrial Accessories we will quote it promptly and suggest a compatible alternative if needed. We can also advise you on the corresponding cone and mounting precautions so the bearing achieves maximum service life.