TIMKEN 52630X tapered roller bearing cup
- Brand
- TIMKEN
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
TIMKEN 52630X belongs to tapered roller bearing cup, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 52630X and any equivalents.
The cup is the outer ring of a TIMKEN tapered roller bearing, and it is the part that presses into the housing. Matched with its cone, it makes up a bearing assembly built to carry radial and axial loads at the same time. You will find it in gearboxes, drive shafts and other industrial equipment where rigidity and load capacity matter.
Codes in this series start with a base number and end in X, for example 244X, 352X or 430X. That final X marks a geometry developed to spread stress more evenly and improve running performance. Every cup carries its own numeric code, and that code pairs it with one specific cone to complete the bearing. To pick the right cup, you need either the cone code or the designation of the complete bearing being replaced.
Typical users include food processing, cement, mining, steel and agricultural machinery manufacturing. Speed reducers, conveyor rollers, mill shafts and pumping equipment are common places to find these cups. The design handles combined loads and small misalignments, which suits demanding environments with vibration and shock.
When selecting a cup, check the outer diameter and mounting width against the housing. The cup is press-fitted into the housing while the cone goes on the shaft, and axial clearance is set during assembly. Correct lubrication and sealing keep contamination out and help the bearing last. Alignment between cone and cup also needs to be verified, since misalignment leads to point loads.
TIMKEN cups interchange with cups from other brands that use the same numeric designation and standardized dimensions. For a quote, send the complete bearing code or the cone and cup numbers so compatibility can be confirmed. If the exact reference is not visible, MR Industrial Accessories can help locate the cup that fits your equipment.
Need a TIMKEN tapered roller cup? Message us on WhatsApp with the code or the model of your equipment. We reply promptly and, when needed, point you to a compatible alternative.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I identify the cup I need?
- Have the complete bearing code or the cone and cup numbers ready, and we will quote the matching TIMKEN cup. If you do not have those, we can help identify it from the housing dimensions.
- Are TIMKEN cups compatible with other brands?
- They are, provided the numeric designation and standardized dimensions are the same. Send the exact code with your quote request so interchangeability can be confirmed.
- What lubrication do you recommend for these bearings?
- A high-quality lithium-based grease or oil, chosen according to speed and operating temperature. The lubricant should suit combined loads and the conditions where the equipment runs. Ask us which option fits your application.