TIMKEN 09195AB tapered roller bearing cup
- Brand
- TIMKEN
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
TIMKEN 09195AB belongs to tapered roller bearing cup, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 09195AB and any equivalents.
The TIMKEN AB series tapered roller cup is the outer race of a tapered roller bearing. It is pressed into the housing and, together with the cone, handles combined radial and axial loads. Typical uses include gearboxes, farm equipment and transport systems where shafts turn at moderate speed with limited misalignment.
The code starts with a base number that sets the cup's main size, followed by the AB suffix that marks this particular variant. Examples are 362AB, 394AB, 432AB and 09195AB. Because cup and cone work as a matched set, always pair the cup code with its corresponding cone when selecting a replacement.
These cups appear in food processing, cement, mining and metalworking plants. You will find them in speed reducers, conveyors, mills, mixers, presses and road equipment. In agriculture, they are used in seeders, harvesters and round balers, where tapered rollers take the combined loads of heavy work. The removable design makes in-plant maintenance and part replacement easier.
When choosing a cup, match the outer diameter and raceway width to the housing. Install with a press or controlled heating; avoid impacts that can mark the raceway. Proper lubrication and sealing help extend service life. Cone-to-cup alignment is critical—too much misalignment causes point loads and early failure. If the equipment vibrates, check axial clearance after mounting.
Cups from different brands can be interchanged if the standardized dimensions and raceway angle match. A similar code is not enough: compare the associated cone number and tolerances. Equivalents exist between manufacturers, but each series keeps its own geometry. When asking for an alternative, send the complete cup and cone codes so the substitution is safe.
To request a TIMKEN tapered roller cup, message us on WhatsApp or email with the exact code from the equipment or drawing. We will quote and, if needed, suggest a compatible alternative. We also manufacture split plummer block housings, ANSI chains and sheaves to complete your order. Send your inquiry and we will reply promptly.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What is the difference between the cup and the cone in a tapered bearing?
- The cup is the outer raceway; the cone is the inner assembly with rollers. They are mounted separately and form a pair that must not be mixed with others. Replace them respecting both codes.
- How do I request a TIMKEN cup on WhatsApp?
- Send the complete code shown on the part, for example 362AB, and if possible the associated cone code. With that data we will quote and indicate a compatible alternative if necessary.
- What care does the mounting of a tapered cup require?
- Use a press or uniform heating, without direct blows on the raceway. Check alignment with the cone and axial clearance after mounting. Proper lubrication and correct sealing prevent premature failures.