V-belt Stark XPA 1400
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK XPA 1400 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPA 1400 and any equivalents.
The Stark XPA 1400 is a cogged narrow V-belt with an XPA profile and a length of 1400 mm. When a drive belt needs replacing, the marking on the old belt is the first thing to read. This page covers what that marking tells you and how to confirm the right belt for your drive.
On the back of most industrial V-belts, the profile and length are printed or stamped. For this Stark belt, the marking is XPA 1400. The XPA profile is a narrow V-belt cross-section, and 1400 mm is the datum length. If the old belt is worn or dirty, clean the back and read the full marking before ordering. A partial or misread marking is a common cause of getting the wrong belt.
Once you have the marking, match it to the belt you need. The Stark XPA 1400 is a cogged narrow V-belt, which means it has a notched construction. The same size is also listed under Optibelt XPA 1400. If your drive uses multiple belts, inspect all of them and replace as a set when one shows wear. Check sheave grooves for wear or debris at the same time.
To request a quote, send the part number XPA 1400, the quantity, and any details from the old belt marking. If you are unsure, a photo of the marking and the drive setup helps confirm the correct belt. We carry the Stark XPA 1400 and can help you verify the profile and length before you order.
Dimensions
- Section
- XPA
Frequently asked questions
- What does the marking on the old belt tell me?
- The marking typically shows the profile and length. For this belt, that is XPA 1400, meaning an XPA profile and 1400 mm length. Use that marking to match the replacement.
- Can I replace just one belt in a multi-belt drive?
- For drives with multiple belts, it is common practice to replace all belts in the set at the same time. Mixing new and worn belts can cause uneven tension and load sharing.
- What should I send to get a quote?
- Send the part number XPA 1400, the quantity you need, and any details from the old belt marking. If you have a photo of the marking or the drive, that can help confirm the correct belt.