V-belt Stark SPZ 800
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →GATES and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPZ 800 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 800 and any equivalents.
This Stark SPZ 800 is a narrow wedge V-belt with an SPZ profile, a 9.7 mm top width, an 8 mm height and a 40° angle. Narrow wedge belts are common on compact, high-speed industrial drives where a standard V-belt would be too wide or too heavy. The same size is also listed under Mitsuboshi SPZ 800, Optibelt SPZ 800 and Gates SPZ 800.
Use this belt on drives that call for an SPZ profile and an 800 mm length. To confirm fit, read the marking on the back of the old belt and match the profile and length exactly. Check the sheave groove for wear, oil or debris, and verify that the belt sits correctly in the groove before ordering.
If the old belt marking is unreadable, measure the top width and height and compare them with the 9.7 mm and 8 mm values above. The 40° angle is the standard wedge angle for this profile. Send the part number, the drive details and a photo of the old belt if you need help confirming the right replacement.
Narrow wedge belts are often replaced in sets when a drive uses multiple belts. Order the same profile and length for every groove in the set. If you need a quote, send the part number SPZ 800 and the quantity by WhatsApp or email.
Dimensions
- Section
- SPZ
Frequently asked questions
- How do I confirm that the Stark SPZ 800 fits my drive?
- Check the marking on the back of the old belt. It should show an SPZ profile and an 800 mm length. Also confirm that the sheave groove is clean and unworn, and that the belt sits at the correct height in the groove.
- What are the dimensions of this belt?
- The Stark SPZ 800 has an SPZ profile, a 9.7 mm top width, an 8 mm height and a 40° angle.
- Can I use another brand with the same size?
- The same size is also listed under Mitsuboshi SPZ 800, Optibelt SPZ 800 and Gates SPZ 800. Send us the part number and drive details and we can help confirm the equivalent.