V-belt Stark SPB 5300
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPB 5300 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 5300 and any equivalents.
This Stark SPB 5300 is a narrow wedge V-belt used in industrial drives where a compact, high-capacity belt is needed. It is identified by its SPB profile and 5300 mm length, with a 16.3 mm top width, 13 mm height and 40° angle. To confirm fit, compare these dimensions and the belt marking against the drive you are replacing.
Narrow wedge V-belts like this SPB profile are common on pumps, fans, compressors, conveyors and other driven machinery. The SPB section sits between standard V-belts and heavier wedge sections, so it is often found where space is limited but torque demands are moderate to high. The 40° angle and 13 mm height are key to seating correctly in the pulley groove.
When matching an existing belt, read the marking on the back of the old belt and note the profile and length. The Stark SPB 5300 has a 16.3 mm top width and 5300 mm length. If the old belt is worn or the marking is unreadable, measure the top width and outside length, and check the pulley groove angle and condition. The same size is also listed under Mitsuboshi SPB 5300 and Optibelt SPB 5300.
For a quote, send the part number Stark SPB 5300, the quantity, and any details from the drive nameplate or old belt. If you are unsure between profiles, include the pulley dimensions and center distance. We carry this belt and can help confirm the right profile and length for your application.
Dimensions
- Section
- SPB
Frequently asked questions
- How do I confirm that the Stark SPB 5300 fits my drive?
- Check the old belt marking for SPB and 5300. The Stark SPB 5300 has a 16.3 mm top width, 13 mm height and 40° angle. Also inspect the pulley grooves for wear and ensure the belt sits correctly without bottoming out.
- Can I replace a different brand with this belt?
- The same size is also listed under Mitsuboshi SPB 5300 and Optibelt SPB 5300. If your current belt matches the SPB profile and 5300 mm length, this Stark belt is a candidate. Always verify the profile and length against your drive before ordering.
- What information should I send for a quote?
- Send the part number Stark SPB 5300, the quantity you need, and any drive details such as pulley diameters or center distance. If you have the old belt, include a photo of the marking. We will reply promptly to confirm the belt or suggest an equivalent.