V-belt Stark SPB 4500
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPB 4500 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 4500 and any equivalents.
Replace a worn narrow wedge V-belt with the Stark SPB 4500. This belt has an SPB profile, a 16.3 mm top width, a 13 mm height, and a 40° angle. The same size is also listed under Mitsuboshi SPB 4500 and Optibelt SPB 4500.
To match it to the belt being replaced, read the marking on the back of the old belt. The part number SPB 4500 identifies the profile and length. Confirm the profile is SPB and that the old belt shows the same 4500 length. If the marking is worn or missing, measure the top width and height: this belt is 16.3 mm across the top and 13 mm high, with a 40° angle.
When the old belt is not readable, check the drive for the required profile and length. The SPB profile is a narrow wedge V-belt, not a classic V-belt. The 4500 length must match the drive's requirement. If you are unsure, send the old belt's marking or your measurements for a quote.
For replacement, inspect the sheaves for wear and alignment before installing the new belt. Replace belts in sets when the drive uses multiple belts, so all belts share the load evenly. The Stark SPB 4500 is supplied by MR Industrial Accessories LLC. To request a quote, send the part number SPB 4500 by WhatsApp or email.
Dimensions
- Section
- SPB
Frequently asked questions
- How do I confirm the Stark SPB 4500 is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. It should show the SPB profile and the 4500 length. You can also measure the top width (16.3 mm) and height (13 mm) to confirm the profile.
- What should I send to request a quote for this belt?
- Send the part number SPB 4500, along with any marking from the old belt or your measurements. If you have the drive details, include them so we can help confirm the right belt.
- Is the same size listed under other brands?
- Yes, the same size is also listed under Mitsuboshi SPB 4500 and Optibelt SPB 4500. We can help you compare if you are replacing one of those.